Kinetis MicrocontrollersのトピックRe: How to send printf output to serial terminal https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245249#M6402 <HTML><HEAD></HEAD><BODY><P>Hello Anand:</P><P></P><P>First, CodeWarrior 10.2 is an old software and I would recommend updating to CW 10.5 which is the latest version, or at least to CW 10.4.</P><P></P><P>Colleague Erich Styger has published a bunch of information and tutorials about printf matter. Those are not specific for K10, but might be very helpful for you:</P><P></P><P><A href="http://mcuoneclipse.com/2013/02/07/tutorial-printf-with-and-without-processor-expert/" title="http://mcuoneclipse.com/2013/02/07/tutorial-printf-with-and-without-processor-expert/">Tutorial: Printf() with (and without) Processor Expert | MCU on Eclipse</A></P><P></P><P><A href="http://mcuoneclipse.com/2013/04/17/printf-with-the-frdm-kl25z-board-and-without-processor-expert/" title="http://mcuoneclipse.com/2013/04/17/printf-with-the-frdm-kl25z-board-and-without-processor-expert/">printf() with the FRDM-KL25Z Board and without Processor Expert | MCU on Eclipse</A></P><P></P><P><A href="http://mcuoneclipse.com/2012/10/14/tutorial-printf-and-hello-world-with-the-freedom-kl25z-board/" title="http://mcuoneclipse.com/2012/10/14/tutorial-printf-and-hello-world-with-the-freedom-kl25z-board/">Tutorial: printf() and “Hello World!” with the Freedom KL25Z Board | MCU on Eclipse</A></P><P></P><P>Regards!</P><P></P><P>Jorge Gonzalez</P></BODY></HTML> Thu, 05 Dec 2013 19:51:34 GMT Jorge_Gonzalez 2013-12-05T19:51:34Z How to send printf output to serial terminal https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245248#M6401 <HTML><HEAD></HEAD><BODY><P>I am using Codewarrior 10.2 for K10 microcontroller. How can I print a formatted printf staement on serial terminal using Uart. Please help.</P></BODY></HTML> Thu, 05 Dec 2013 10:04:00 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245248#M6401 anandkumar 2013-12-05T10:04:00Z Re: How to send printf output to serial terminal https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245249#M6402 <HTML><HEAD></HEAD><BODY><P>Hello Anand:</P><P></P><P>First, CodeWarrior 10.2 is an old software and I would recommend updating to CW 10.5 which is the latest version, or at least to CW 10.4.</P><P></P><P>Colleague Erich Styger has published a bunch of information and tutorials about printf matter. Those are not specific for K10, but might be very helpful for you:</P><P></P><P><A href="http://mcuoneclipse.com/2013/02/07/tutorial-printf-with-and-without-processor-expert/" title="http://mcuoneclipse.com/2013/02/07/tutorial-printf-with-and-without-processor-expert/">Tutorial: Printf() with (and without) Processor Expert | MCU on Eclipse</A></P><P></P><P><A href="http://mcuoneclipse.com/2013/04/17/printf-with-the-frdm-kl25z-board-and-without-processor-expert/" title="http://mcuoneclipse.com/2013/04/17/printf-with-the-frdm-kl25z-board-and-without-processor-expert/">printf() with the FRDM-KL25Z Board and without Processor Expert | MCU on Eclipse</A></P><P></P><P><A href="http://mcuoneclipse.com/2012/10/14/tutorial-printf-and-hello-world-with-the-freedom-kl25z-board/" title="http://mcuoneclipse.com/2012/10/14/tutorial-printf-and-hello-world-with-the-freedom-kl25z-board/">Tutorial: printf() and “Hello World!” with the Freedom KL25Z Board | MCU on Eclipse</A></P><P></P><P>Regards!</P><P></P><P>Jorge Gonzalez</P></BODY></HTML> Thu, 05 Dec 2013 19:51:34 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245249#M6402 Jorge_Gonzalez 2013-12-05T19:51:34Z Re: How to send printf output to serial terminal https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245250#M6403 <HTML><HEAD></HEAD><BODY><P>Hi Anand Kumar,</P><P>If you update your CW version, you can use the component of ConsoleIO base on PE, and configure it like this:</P><P></P><P><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_0.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/41620iE627697614505E3E/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_0.png" alt="pastedImage_0.png" /></span></P><P>then generate code and build it, you will can use the printf!</P><P></P><P>I wish it helps you!</P><P>Best regards!</P><P>Jing</P></BODY></HTML> Fri, 06 Dec 2013 01:30:03 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-send-printf-output-to-serial-terminal/m-p/245250#M6403 kerryzhou 2013-12-06T01:30:03Z