topic Re: What is where on MIMXRT1060-EVK? in Kinetis Microcontrollers

What is where on MIMXRT1060-EVK?

hgiese — Fri, 11 Mar 2022 19:36:13 GMT

Hello,

does a document exist where one can see _where_ all the jumpers, resistores and switches are located? Hopefully as PDF - then I could enlarge it as much as I need, print it out and tape it on the wall. You see, I'm not a young man anymore and my vision is rather bad.

Thank you

Helmut

Re: What is where on MIMXRT1060-EVK?

mjbcswitzerland — Sun, 13 Mar 2022 17:29:41 GMT

Hi Helmut

I have printed some Gerber file layers in PDF for you - see whether they are useful.

Regards

Mark

See
https://www.utasker.com/iMX/developers.html
for various i.MX RT 1060 resources to simplify developments

Re: What is where on MIMXRT1060-EVK?

jingpan — Mon, 14 Mar 2022 02:36:22 GMT

Hi @hgiese ,

Please refer to RT1060-EVK user manual. The jumper table is at section 1.8 and 1.9.
file:///C:/Users/nxf32199/Downloads/MIMXRT1060EVKBUM.pdf

Regards,

Jing

Re: What is where on MIMXRT1060-EVK?

hgiese — Mon, 14 Mar 2022 19:29:24 GMT

Hi Jing,

many thanks for this tip. I found the file MIMXRT1060EVKBUM.pdf but there is a small problem: It does not show the board I have. I got mine last summer. It shows 2 stickers

- 701-31357 Rev. A and

- SCH-31367 Rev. A2

whereas the said document says in 'Revision History': Rev. 0, Date: 7.Jan. 2022, 'Initial public release', the Arduino connectors are labeled J16, J33, J17 and J22 while on my board they are labeled J22 - J25, etc.

So I guess this document describes a revision whis is different from mine, and since it was published only in January this year as 'Initial public release' I'm afraid a similar document does not exist for the revision I have.

Nevertheless many thanks for your help, this document is still helpful

Helmut

Re: What is where on MIMXRT1060-EVK?

hgiese — Mon, 14 Mar 2022 19:46:51 GMT

Hi Mark,

many thanks for your help. The PDFs help a bit - if they were searchable (for text) they would be perfect.

Still, thank you for your help.

Helmut