KEA8 EEPROM EMULATION

Cram — Tue, 14 Dec 2021 08:32:16 GMT

Hi there,

I tried to avoid for a long time EEPROM emulation for KEA8 uControllers, but is no longer possible

I want to store 3 bytes, in order to save a calibration data.

I downloaded the EEPROM driver for KEA8 (KEAZN8_64_EEE_DEVD) I read the PDF inside and also installed the driver, but is there any gurther information more useful? any AN with an example?

I am completly lost with NXP documentation.

Best regards,
Marc

Re: KEA8 EEPROM EMULATION

PabloAvalos — Wed, 29 Dec 2021 19:40:47 GMT

Hi, @Cram

Hoping you are excellent, and having happy holiday.

Due to holiday the replies were delayed.

Regarding your question, there is an application note that might be helpful about EEPROM Emulation Driver for Kinetis E Series here: https://www.nxp.com/docs/en/application-note/AN4903.pdf

At last but not least, I would like to share with you a thread from our community about KEA128 EEPROM Emulation Demo Interpretation that might be helpful too: https://community.nxp.com/t5/Kinetis-Microcontrollers/EEPROM-Emulation-driver-for-KEA128-Demo-Interpretation/ta-p/1106416

If there is something else I might be able to help you, please let me know.

Sincerely,

Pablo Avalos.

topic KEA8 EEPROM EMULATION in Kinetis Microcontrollers

KEA8 EEPROM EMULATION

Re: KEA8 EEPROM EMULATION