Kinetis MicrocontrollersのトピックHow to flash a program with CAN

How to flash a program with CAN

T2 — Thu, 18 Nov 2021 06:08:48 GMT

Hello,

I want to write the program created by MCUXpresso to the target board via CAN.

It would be helpful if you could tell me what kind of method is available.

As a result of my research, I arrived at the MCU Bootloader.

But it's difficult for me to understand.

It would be helpful if you could tell me if there is any other way.

* I have the following boards.

FRDM-KW36, TWR-KE18F, TWR-KV46F150M

Best regards.

jingpan — Fri, 19 Nov 2021 07:48:16 GMT

Hi @T2 ,

You can refer to this article.

Regards,

Jing

T2 — Wed, 24 Nov 2021 22:45:30 GMT

Hi Jing,

Thank you for your advice!

I will try it with reference to the materials I was taught.

Best Regard,

Takagi