topic Re: Freemaster tutorial for mkv10z16 in Kinetis Microcontrollers

Freemaster tutorial for mkv10z16

Frogram — Thu, 07 Oct 2021 07:48:57 GMT

Hi, all

I bought a MKV10Z16 for FOC control a robot in-wheel motor.

I have ST-LINK, so I tried to connect MKV10 and freemaster with that but failed.

I can't even connect or check whether its running,

any tutorial or example for starting freemaster?

Thanks.

Re: Freemaster tutorial for mkv10z16

Robin_Shen — Fri, 08 Oct 2021 02:31:14 GMT

Hi Frogram,

I didn't find the ST-LINK in the list of debugger probe of FreeMASTER Connection Wizard.

I don’t know if ST-Link has a USB to UART function, if so, you can try to choose this connection method.

We have a FreeMASTER community forum, I suggest you go there to ask questions and get more accurate answers.

You can find tutorial or example there:

Check out FreeMASTER How To article

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Freemaster tutorial for mkv10z16

Frogram — Fri, 08 Oct 2021 06:09:54 GMT

Thanks!

I'll check and try them!

Re: Freemaster tutorial for mkv10z16

Frogram — Fri, 08 Oct 2021 07:07:33 GMT

I am looking at, but it seems support only developer boards like frdm

how could I just start with standalone chip?

thanks