Kinetis MicrocontrollersのトピックHelp getting started - Difficulties bringing up boards for first use

Help getting started - Difficulties bringing up boards for first use

justinreina — Fri, 20 Aug 2021 03:59:01 GMT

Hi,

I am getting practice with your LPC & Kinetis lines, I have prepared the following kit for test -

LPCXpresso4337 (debug working)
FRDM-KL25Z (debug not working)
FRDM-K64F (debug not working)
EA LPC4088 QuickStart Board (debug not working)
DEMO9RS08KA2 (debug not working)

Want to get HelloWorld up and running, on MCUXpresso v11.0.0 using Window 10. I have a selection of debug tools, how best to proceed?

Re: Help getting started - Difficulties bringing up boards for first use

ErichStyger — Fri, 20 Aug 2021 06:41:51 GMT

As for the boards with OpenSDA circuit, you should check if you are affected by a Windows 10 issue (see for example https://mcuoneclipse.com/2018/04/10/recovering-opensda-boards-with-windows-10/ ) and if you need to upgrade the board firmware first.

As for the IDE, keep in mind that 11.4.0 is the current one, so probably best if you use the latest and greatest (you still can keep your 11.0.0, but if using latest SDKs it is better to use the 11.4.0).

I hope this helps,

Erich