https://community.nxp.com/t5/Kinetis-Microcontrollers/BusPal-questions/m-p/1321479#M61192 <P>Hi,</P> <P>1.Yes</P> <P>2. Please download NXP_Kinetis_Bootloader_2_0_0 package from&nbsp;<A href="https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcuboot-mcu-bootloader-for-nxp-microcontrollers:MCUBOOT?tab=Design_Tools_Tab" target="_blank">https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcuboot-mcu-bootloader-for-nxp-microcontrollers:MCUBOOT?tab=Design_Tools_Tab</A></P> <P>Buspal project is in&nbsp;NXP_Kinetis_Bootloader_2_0_0\apps\bus_pal.</P> <P>3,4. No, this project is build in IAR. You have to migrate the project to MCUXpresso. This is not a hard work. Most work is copy and paste source code to a empty or hello_world MCUXpresso project. Then configure the clock and peripheral driver.</P> <P>&nbsp;</P> <P>Regards,</P> <P>Jing</P> Wed, 11 Aug 2021 02:57:12 GMT jingpan 2021-08-11T02:57:12Z https://community.nxp.com/t5/Kinetis-Microcontrollers/BusPal-questions/m-p/1320467#M61181 <P>Hi,</P><P>Some questions about BusPal:</P><UL><LI>BusPal seems to be available for 3 boards: FRDM-KL25Z, TWR-KV46F150M and TWR-K65F180M. Is it correct?</LI><LI>Digging into SDK_2.8.0_TWR-KV46F150M (mcu-boot folder) I'm not able to find the BusPal project. Where is this utility?</LI><LI>Is it supported by the latest MCUxpresso IDE? <SPAN class="VIiyi"><SPAN class="JLqJ4b ChMk0b"><SPAN>If not, what changes should I make to migrate the project to the MCUxpresso IDE?</SPAN></SPAN></SPAN></LI><LI>I have a FRDM-KE16Z with CAN. How could I do to use BusPal with this board?</LI></UL><P>Thanks in advance,<BR />gaston</P> Mon, 09 Aug 2021 16:54:33 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/BusPal-questions/m-p/1320467#M61181 gschelotto 2021-08-09T16:54:33Z https://community.nxp.com/t5/Kinetis-Microcontrollers/BusPal-questions/m-p/1321479#M61192 <P>Hi,</P> <P>1.Yes</P> <P>2. Please download NXP_Kinetis_Bootloader_2_0_0 package from&nbsp;<A href="https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcuboot-mcu-bootloader-for-nxp-microcontrollers:MCUBOOT?tab=Design_Tools_Tab" target="_blank">https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/mcuboot-mcu-bootloader-for-nxp-microcontrollers:MCUBOOT?tab=Design_Tools_Tab</A></P> <P>Buspal project is in&nbsp;NXP_Kinetis_Bootloader_2_0_0\apps\bus_pal.</P> <P>3,4. No, this project is build in IAR. You have to migrate the project to MCUXpresso. This is not a hard work. Most work is copy and paste source code to a empty or hello_world MCUXpresso project. Then configure the clock and peripheral driver.</P> <P>&nbsp;</P> <P>Regards,</P> <P>Jing</P> Wed, 11 Aug 2021 02:57:12 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/BusPal-questions/m-p/1321479#M61192 jingpan 2021-08-11T02:57:12Z