Kinetis MicrocontrollersのトピックRe: KDS path not set

KDS path not set

JiaAn — Wed, 04 Aug 2021 07:01:41 GMT

I am running KDS3.3.0. And when I press debug. There's an error:

I am using Windows 10 (x64) and debugging MKL17Z256 with USBDM. I did check that USBDM can program MCU without any error message. But what I need is to use KDS to debug my code. Can anyone tell me how to fix this problem? Thanks.

Re: KDS path not set

ErichStyger — Wed, 04 Aug 2021 07:08:36 GMT

Check your launch configuration: it seems to me that you don't have correctly configured the path to USBDM.

I hope this helps,

Erich

Re: KDS path not set

JiaAn — Wed, 04 Aug 2021 07:13:50 GMT

This is my first time using KDS and USBDM. I need more details to help.

Can you tell me where should I found the launch configuration? Thank you.

Re: KDS path not set

ErichStyger — Wed, 04 Aug 2021 07:18:12 GMT

Menu Run > Run Configurations shows all launch configurations.

Re: KDS path not set

JiaAn — Wed, 04 Aug 2021 07:25:59 GMT

I checked the settings. And seems nothing wrong there.

I attached the screenshots in case there're some settings incorrect but I didn't find out.

Re: KDS path not set

ErichStyger — Wed, 04 Aug 2021 07:59:18 GMT

Your command line shows spaces in the command for the executable, this is probably the issue. Otherwise I recommend to consult the USBDM forum/user group?

Re: KDS path not set

JiaAn — Wed, 04 Aug 2021 08:21:55 GMT

I accidentally find out that I do not have C:\Freescale\KSDK

But I already install it.

Could this be a problem? If so, how should I fix this?

Re: KDS path not set

ErichStyger — Wed, 04 Aug 2021 10:30:33 GMT

no, your problem is that it cannot find the gdb for USBDM, so the path to the gdb is wrong.

Re: KDS path not set

JiaAn — Thu, 05 Aug 2021 01:13:03 GMT

Okay, but I just figure out that I got another problem.

A project can build on another computer. But on mine, it will show errors.

Do you know what might cause this? I can't even build the project.

Re: KDS path not set

ErichStyger — Thu, 05 Aug 2021 04:50:15 GMT

Check the build tools output in the Eclipse console view.