LPC LINK 2 debugger

Teja114 — Tue, 27 Apr 2021 08:44:00 GMT

Hi there,

Greetings!!!

i'am saiteja currently working with ke06z microcontroller, previously we used PE Micro debugger ,

now we changed to LPC LINK 2 debugger we are unable to program KE06Z micro controller with LPC LINK 2 debugger, kindly help us for debugger settings in Kinetis IDE

Re: LPC LINK 2 debugger

Omar_Anguiano — Wed, 28 Apr 2021 20:05:34 GMT

Hello!

Hope you are well. My name is Omar and I will gladly help you with this.
I suggest you install CMSIS-DAP firmware into your board, you can find it at this link: https://www.nxp.com/design/software/development-software/sensor-toolbox-sensor-development-ecosystem/opensda-serial-and-debug-adapter:OPENSDA#FRDM-KE06Z

Also, please program the LPC-Link2 with CMSIS-DAP, this can be done with LPCScrypt: https://www.nxp.com/design/microcontrollers-developer-resources/lpc-microcontroller-utilities/lpcscrypt-v2-1-2:LPCSCRYPT
You can find more detailed information about using the LPC-Link2 in chapter 19.9 of the MCUXpresso User Guide: https://www.nxp.com/docs/en/user-guide/MCUXpresso_IDE_User_Guide.pdf

Let me know if this is helpful, if you have more questions do not hesitate to ask me.
Best regards,
Omar

topic Re: LPC LINK 2 debugger in Kinetis Microcontrollers

LPC LINK 2 debugger

Re: LPC LINK 2 debugger