Kinetis MicrocontrollersのトピックRe: bootloader modify interrupt vector table start address

bootloader modify interrupt vector table start address

ahjg_xu — Fri, 02 Apr 2021 03:16:18 GMT

I debug the BootLoader for MKE06 , use mcuxpresso(11) IDE ,I want to modify interrupt vector table start address,"MKE06Z4_Project_Test_Debug.ld" files not allow to change；

how to do ，please ask me， thank you！！

Re: bootloader modify interrupt vector table start address

danielchen — Fri, 02 Apr 2021 06:57:26 GMT

Hi @ahjg_xu

Please try to change the address as below picture.

Regards

Daniel

Re: bootloader modify interrupt vector table start address

ahjg_xu — Fri, 02 Apr 2021 15:50:58 GMT

thank you for your help !

but,I have a question，

When I create a project, the file （MKE06Z4_Project_Test_Debug.ld）already has "section" about ". ISR_ Vector ", and this" section "in flash area,

Now, I want to put "ISR"_ "Vector section" is redefined in RAM area. What will I do? Is it OK to modify mcuxpresso ide?

please tell me. thank you!!!

Re: bootloader modify interrupt vector table start address

danielchen — Mon, 21 Jun 2021 03:00:54 GMT

Please refer to below link: How to relocate interrupt vector table in MCUXpresos

https://community.nxp.com/t5/MCUXpresso-IDE/How-to-relocate-interrupt-vector-table-in-MCUXpresso/m-p/666705

Regards

Daniel

Re: bootloader modify interrupt vector table start address

ahjg_xu — Tue, 06 Jul 2021 13:39:11 GMT

Can mpc5604 use mcuxpresso ide?

If yes, how can I download SDKs from the website?

Re: bootloader modify interrupt vector table start address

danielchen — Wed, 07 Jul 2021 05:58:06 GMT

Hi @ahjg_xu :

MCUXpresso IDE supports below devices. unfortunately MPC5604 is not supported.

Regards

Daniel