flashloader_loader ran an error on the IAR

wangb — Mon, 19 Oct 2020 08:22:29 GMT

Why do I run it on the IAR and it prompts me "Fatal Error[Pe1696]: cannot open source file "debug/flashloader_image.c . C:\Users\wangb\Desktop\NXP_Kinetis_Bootloader_2_0_0\src\bootloader\src\bl_flashloader.c 38 " ??? Thank you.

Re: flashloader_loader ran an error on the IAR

kerryzhou — Mon, 19 Oct 2020 09:19:46 GMT

I suggest you build the tower_bootloader directly. This is the flash bootloader, and can be always used.

flashloader_loader need to associated with flashloader, you need to build the flashloader at first, then build the flashloader_loader, these two project used together, and this is one time used, after you update the app, then your flashloader will be disappear, that's why I suggest you use the tower_bootloader.

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

topic Re: flashloader_loader ran an error on the IAR in Kinetis Microcontrollers

flashloader_loader ran an error on the IAR

Re: flashloader_loader ran an error on the IAR