kinetic design studio debugging issue with MKE04Z64

ravindra — Sat, 17 Oct 2020 09:20:49 GMT

Hi,

i am facing issue while software debugging by using kinetis design studio IDE with J link segger programmer and MKE04Z64 MCU

i am able to burn programme into mcu but problem comes only for debugging the code.

kindly help us to sort out the issue

Re: kinetic design studio debugging issue with MKE04Z64

nxf58904 — Tue, 20 Oct 2020 06:42:42 GMT

Hi，

First，we use a blinking example to make sure that your chip can work well.

Then，check the initialization of the chip . For example, if you use systick ,but you didn't init it ,the issue will happen.

Jianyu:

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic kinetic design studio debugging issue with MKE04Z64 in Kinetis Microcontrollers

kinetic design studio debugging issue with MKE04Z64

Re: kinetic design studio debugging issue with MKE04Z64