topic Re: K60 FlexCAN in Kinetis Microcontrollers

K60 FlexCAN

vasyapupkin — Thu, 19 Sep 2013 08:53:14 GMT

I can not turn on the receiver FIFO (CAN_LDD component)

Re: K60 FlexCAN

vfilip — Mon, 23 Sep 2013 08:34:51 GMT

Hello,

could you please provide more details? What version of CW do you use? What MCU, etc.?

The best way would be to post here the ProcessorExpert.pe file from your project and provide info about CW verison that you use.

Best regards

Vojtech Filip

Processor Expert Support Team

Re: K60 FlexCAN

vasyapupkin — Tue, 24 Sep 2013 11:54:00 GMT

Hello Vojtech Filip.

I use CW10.4 and TowerKit K60F120M.

PE when choosing ReceiverFIFO says: "ERROR The component doesn't support this setting!"

What are the component settings prohibit enable FIFO?

Or component does not support FIFO?

Re: K60 FlexCAN

vasyapupkin — Tue, 24 Sep 2013 12:03:52 GMT

In reference to the component written:

Receiver FIFO - Enable/Disable receiver FIFO feature.

The following items are available only if the group is enabled (the value is "Enabled")

Where to allow this?

Re: K60 FlexCAN

vfilip — Wed, 25 Sep 2013 09:35:54 GMT

Hello,

this feature is currently supported only for MSCAN device. As workaround you could use "Message buffers" or freeze the code of this component and implement it manually. I have also passed request to support FIFO feature to developers.

We are sorry for inconvenience.

Best regards

Vojtech Filip

Processor Expert Support Team

Re: K60 FlexCAN

vasyapupkin — Thu, 26 Sep 2013 06:10:33 GMT

Thank you for your help. I will implement manually.

Re: K60 FlexCAN

ninestone — Wed, 19 Feb 2014 22:14:30 GMT

I've run into the same issue on a Kinetis device. I hope this will be supported in the near future.