topic Re: KV58: Acessing ITCM in Kinetis Microcontrollers

KV58: Acessing ITCM

lsrbigfoot — Tue, 07 Jul 2020 20:21:02 GMT

I plan to create a few data variables in ITCM (RAM Partition 2) to run a few memory tests on a MKV58F1M0VLQ24 MCU. Do I have to configure register(s) to enable ITCM? If yes then which register(s)?

Re: KV58: Acessing ITCM

kerryzhou — Wed, 08 Jul 2020 06:45:25 GMT

Hi lsrbigfoot

If you want to create a few data variables in ITCM, you just need to define the data in the related ITCM data range:

You don't need to configure any other register.

You can try it on your side.

If you still have questions about it, please kindly let me know.

Best Regards,

Kerry

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: KV58: Acessing ITCM

lsrbigfoot — Thu, 23 Jul 2020 01:10:00 GMT

I tried accessing ITCM to do a few memory tests. Memory appears to be working. Thanks!