topic Re: UART 9 bit mode K64F in Kinetis Microcontrollers

UART 9 bit mode K64F

sdeshp11 — Mon, 16 Mar 2020 14:39:11 GMT

Hello,

I'm trying to implement a 9bit UART to broadcast ADC values to several slaves.

K64F is the master here who will read thermister values and broadcast it to the slaves.

I'm using processor expert.

Can anyone provide some guidance?

Re: UART 9 bit mode K64F

nxf56274 — Tue, 17 Mar 2020 02:16:49 GMT

Hi,

You can use the other uart example. And when you configure the register, you should configure the bit "M" of UART Control Register 1.

TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: UART 9 bit mode K64F

sdeshp11 — Tue, 17 Mar 2020 12:36:45 GMT

I'm using processor expert. I don't think I have to think about the registers.

Re: UART 9 bit mode K64F

nxf56274 — Wed, 18 Mar 2020 01:44:40 GMT

Hi,

The link is the document that teaches you how to use the PE.

https://www.nxp.com/webapp/Download?colCode=CWPEXUG

TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!