Bootloader for K10 through UART

kbhat — Tue, 05 Nov 2019 04:03:21 GMT

Hi,

I'm facing issue with the K10 bootloader. I have used the AN2295 K60 serial bootloader and ported it for K10. I'm using the PC application provided with the AN2295 package. The PC application throws an error saying “unknown protocol version”.

The MCU is continuously sending the ACK, but the MCU is not receiving the appropriate command from the PC application to fetch the MCU info. Please help.

Re: Bootloader for K10 through UART

mjbcswitzerland — Tue, 05 Nov 2019 18:46:23 GMT

The uTasker project includes AN2295 compatible loaders for all processor without needing porting effort - it is free open source (see below) so may save you some time: http://www.utasker.com/docs/uTasker/uTaskerSerialLoader.pdf

Regards

Mark

Complete Kinetis solutions for faster/more efficient professional needs, training and support: http://www.utasker.com/kinetis.html
i.MX RT project compatibility: http://www.utasker.com/iMX.html
Including FreeRTOS integration for all Kinetis parts

Kinetis K60:
- http://www.utasker.com/kinetis/TWR-K60N512.html
- http://www.utasker.com/kinetis/TWR-K60D100M.html
- http://www.utasker.com/kinetis/TWR-K60F120M.html
- http://www.utasker.com/kinetis/ELZET80_NET-KBED.html
- http://www.utasker.com/kinetis/ELZET80_NET-K60.html

uTasker: supporting >1'000 registered Kinetis users get products faster and cheaper to market

Request Free emergency remote desk-top consulting at http://www.utasker.com/services.html

Open Source version at https://github.com/uTasker/uTasker-Kinetis

https://community.nxp.com/thread/512558
https://community.nxp.com/thread/352862
https://community.nxp.com/thread/498809

Kinetis MicrocontrollersのトピックRe: Bootloader for K10 through UART

Bootloader for K10 through UART

Re: Bootloader for K10 through UART