topic SDK error in Kinetis Microcontrollers

SDK error

bendelathouwer — Thu, 05 Mar 2020 19:30:20 GMT

after importing an SDK(version 2.7.0 for the kintis K64) in the mcuxpresso ide i get the error unable to find the manifest fil in the sdk zip and that the file is invalid And i got the sdk from the SDK builder site.

Does anyone know what I did wrong?

Thank you in advance and with best regards Ben

Re: SDK error

danielchen — Fri, 06 Mar 2020 01:20:26 GMT

Hi Ben:

Which IDE you are using?

SDK 2.7 should work with MCUXpresso IDE 11, please download the latest IDE from

MCUXpresso IDE|Eclipse-based Integrated Development Environment (IDE) | NXP

Regards

Daniel

Re: SDK error

bendelathouwer — Fri, 06 Mar 2020 10:07:25 GMT

Thank you verry mutch !

I was using the old ide and that must be the reason it didn't work. Also a second question.Is there an easy way of toggling a pin I asume using the GPIO_Porttoggle command but how do i use it ?

thank you in advance and with best regards Ben

Re: SDK error

danielchen — Fri, 20 Mar 2020 06:46:23 GMT

Hi Ben:

There is one GPIO example project demonstrates how to toggle a GPIO pin

Please refer to demo drivers/gpio/led_output

The example is supported by the set, clear, and toggle write-only registers for each port output data register. The
example take turns to shine the LED.

Regards

Daniel