topic Re: Kinetis Copy the code into RAM in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/Kinetis-Copy-the-code-into-RAM/m-p/951356#M54739 <HTML><HEAD></HEAD><BODY><P>Hi yu,</P><P>1, you can see here <A href="http://www.keil.com/support/docs/3723.htm">http://www.keil.com/support/docs/3723.htm</A></P><P>and here <A href="https://blog.csdn.net/lijianboyangting/article/details/78471045">https://blog.csdn.net/lijianboyangting/article/details/78471045</A></P><P>2, you can copy the vector table to a certain address then write the start address to SCB-&gt;VTOR</P><P></P><P>Regards,</P><P>Jing</P></BODY></HTML> Tue, 06 Aug 2019 08:59:35 GMT jingpan 2019-08-06T08:59:35Z Kinetis Copy the code into RAM https://community.nxp.com/t5/Kinetis-Microcontrollers/Kinetis-Copy-the-code-into-RAM/m-p/951355#M54738 <HTML><HEAD></HEAD><BODY><P>KV46 Two questions:</P><P>(1)I was testing the bootloader. How to copy the flash erase and program code into the RAM.(Keil IDE)</P><P>(2)How to copy the ISR into the RAM. Do you had a demo for this?(Keil IDE)</P></BODY></HTML> Mon, 05 Aug 2019 09:42:57 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Kinetis-Copy-the-code-into-RAM/m-p/951355#M54738 cyesman 2019-08-05T09:42:57Z Re: Kinetis Copy the code into RAM https://community.nxp.com/t5/Kinetis-Microcontrollers/Kinetis-Copy-the-code-into-RAM/m-p/951356#M54739 <HTML><HEAD></HEAD><BODY><P>Hi yu,</P><P>1, you can see here <A href="http://www.keil.com/support/docs/3723.htm">http://www.keil.com/support/docs/3723.htm</A></P><P>and here <A href="https://blog.csdn.net/lijianboyangting/article/details/78471045">https://blog.csdn.net/lijianboyangting/article/details/78471045</A></P><P>2, you can copy the vector table to a certain address then write the start address to SCB-&gt;VTOR</P><P></P><P>Regards,</P><P>Jing</P></BODY></HTML> Tue, 06 Aug 2019 08:59:35 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Kinetis-Copy-the-code-into-RAM/m-p/951356#M54739 jingpan 2019-08-06T08:59:35Z