topic Re: Arduino IDE does not recognize NVIC? in Kinetis Microcontrollers

Arduino IDE does not recognize NVIC?

bert_haj-ali — Mon, 30 Sep 2019 06:23:43 GMT

Hello,

I am using a development board that has the K66 processor on it and it is Arduino-compatible; it's called the Teensy 3.6. I am programming it through the Arduino IDE. I am trying to trigger the ADC with a center-alligned PWM with an interrupt following the application notes AN4410 and AN5142. However, the IDE does not recognize NVICIP58, NVICICPR1 and NVICISER1 or any NVIC for that matter.

Does anyone have a solution for this?

Thanks in advance

Re: Arduino IDE does not recognize NVIC?

mjbcswitzerland — Mon, 30 Sep 2019 11:27:05 GMT

The header files in your library probably use different NVIC names. Search the header files to find the ones used and you should be able to rename them accordingly.

Regards

Mark

Complete Kinetis solutions for professional needs, training and support: http://www.utasker.com/kinetis.html

Kinetis K66:
- http://www.utasker.com/kinetis/TWR-K65F180M.html
- http://www.utasker.com/kinetis/FRDM-K66F.html
- http://www.utasker.com/kinetis/TEENSY_3.6.html
uTasker: supporting >1'000 registered Kinetis users get products faster and cheaper to market

Request Free emergency remote desk-top consulting at http://www.utasker.com/services.html

Open Source version at https://github.com/uTasker/uTasker-Kinetis

https://community.nxp.com/thread/512558

Re: Arduino IDE does not recognize NVIC?

bert_haj-ali — Mon, 30 Sep 2019 22:22:18 GMT

Ah yeah, that could be it.

Do you happen to know where I can find these header files?

Thanks