How to modify the program start address and vector table address in MCUXpresso

1054144848 — Mon, 15 Jul 2019 09:54:59 GMT

I am developing an AN2295-based boot loader program. Now I need to modify the application's ROM start address and vector table address.In the AN2295 Developer's Serial Bootloader manual, IAR and CodeWarrior have linker files (ICF file in IAR and in LCF file in CodeWarrior) that can be modified. Then, where is the linker files of MCUXpresso, how to modify it?

Re: How to modify the program start address and vector table address in MCUXpresso

Omar_Anguiano — Mon, 15 Jul 2019 22:36:34 GMT

Hello 1054144848@qq.com‌

We have 2 ways to do that.

One way is directly at the project explorer, you need to go to the debug folder where the files are located:

Other way to modify memory address is through MCU settings. You can access to this tab by going to your project properties:

For more information I suggest you to take a look under chapter 18 "Memory Configuration and Linker Scripts"

https://www.nxp.com/docs/en/user-guide/MCUXpresso_IDE_User_Guide.pdf

Let me know if this helps

Best regards

Omar

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

-------------------------------------------------------------------------------

topic Re: How to modify the program start address and vector table address in MCUXpresso in Kinetis Microcontrollers

How to modify the program start address and vector table address in MCUXpresso

Re: How to modify the program start address and vector table address in MCUXpresso