topic Re: How to flash K60N512 with CodeWarrior 10.4 for offline running (Not in debugging mode) in Kinetis Microcontrollers

How to flash K60N512 with CodeWarrior 10.4 for offline running (Not in debugging mode)

yonggonlee — Thu, 01 Aug 2013 02:18:12 GMT

I just started using CodeWarrior 10.4 for my K60N512 tower. I was able to compile and debug some example projects without problem. Now I want to program the tower so that it runs without the debugger. My test projects blinks the orange LED. When in debugging mode it works fine. How I can now program the target so that the LED blinking works only by supplying power, for example, via wall outlet USB adapter. I could not find any doc or instruction regarding this. Please help.

Re: How to flash K60N512 with CodeWarrior 10.4 for offline running (Not in debugging mode)

ZhangJennie — Thu, 01 Aug 2013 06:01:20 GMT

i beleive you can find the answer in Erich blog:

Standalone Flash Programmer

http://mcuoneclipse.com/2012/08/02/standalone-flash-programmer/

CodeWarrior Flash Programming from a DOS Shell:

http://mcuoneclipse.com/2012/08/03/codewarrior-flash-programming-from-a-dos-shell/

Re: How to flash K60N512 with CodeWarrior 10.4 for offline running (Not in debugging mode)

yonggonlee — Thu, 08 Aug 2013 15:05:13 GMT

Jennie, thank you so much for your help. After a lot of frustration I just wiped out CW and Freescale MQX, downloaded latest versions of them (even though I knew I had latest version) and reinstalled them. And Wa-Lah! It is working without any issue. So I did not fix anything.

However, based on your comment I had a chance to learn a lot about Cortex M4 and CW. So I want to thank you.

By the way, it is my first time working with RTOS which is a whole new experience for a old timer like me. And I am so excited.