From Shell Linux - Loading new software in MK66F and relaunch (restart)

daniel_mouren — Mon, 18 Feb 2019 14:48:59 GMT

Hi,

I'm using the K66F FRDM and I want to load new binary software using the linux shell.

These steps already succeed:

Generate a binary file.
Copy this file to the boot loader
Unplug and plug in the USB cable

But here is the manual access to the USB cable is not possible and I have to find a way with the Linux shell to reboot the card.

note: I also opened a ticket on the stack exchange community.

Linux Shell / Power off USB port

Thank you in advance

Re: From Shell Linux - Loading new software in MK66F and relaunch (restart)

Hui_Ma — Thu, 21 Feb 2019 06:28:49 GMT

Hi,

Please check here to download latest OpenSDA firmware for FRDM-K66F board.

I tested to download Segger J-Link firmware from here and after updated the firmware, I could drag and drop application image (*.bin) to MSD USB disk (FRDM-K66FJ).

About how to update FRDM-K66F on board OpenSDA firmware, please check below picture:

Wish it helps.

Have a great day,
Mike

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic From Shell Linux - Loading new software in MK66F and relaunch (restart) in Kinetis Microcontrollers

From Shell Linux - Loading new software in MK66F and relaunch (restart)

Re: From Shell Linux - Loading new software in MK66F and relaunch (restart)