topic Re: Loading OpenSDAv2 and DAPLink to FRDM-K64F ? in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/Loading-OpenSDAv2-and-DAPLink-to-FRDM-K64F/m-p/843455#M50814 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Please check below thread with similar requirement:</P><P><A href="https://community.nxp.com/thread/445886">When i connect TWR-KE18F to my PC it shows portal device instead of COM PORT. I unable to change bootloader due to that …</A>&nbsp;</P><P>The OpenSDA firmware for FRDM-K64F board could be download from <A href="https://www.nxp.com/support/developer-resources/run-time-software/kinetis-developer-resources/ides-for-kinetis-mcus/opensda-serial-and-debug-adapter:OPENSDA#FRDM-K64F">here</A>.</P><P>Wish it helps.</P><P></P><P>best regards,</P><P>Mike</P></BODY></HTML> Tue, 14 Aug 2018 12:47:40 GMT Hui_Ma 2018-08-14T12:47:40Z Loading OpenSDAv2 and DAPLink to FRDM-K64F ? https://community.nxp.com/t5/Kinetis-Microcontrollers/Loading-OpenSDAv2-and-DAPLink-to-FRDM-K64F/m-p/843454#M50813 <HTML><HEAD></HEAD><BODY><P>Are there any suggested debug steps when the loading steps for OpenSDAv2 copy binary and for DAPLink copy binary to FRDM-K64Fdoes not work as described (e.g., does not come up in maintenance mode)?&nbsp;</P></BODY></HTML> Sun, 12 Aug 2018 00:20:43 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Loading-OpenSDAv2-and-DAPLink-to-FRDM-K64F/m-p/843454#M50813 stephen_hart 2018-08-12T00:20:43Z Re: Loading OpenSDAv2 and DAPLink to FRDM-K64F ? https://community.nxp.com/t5/Kinetis-Microcontrollers/Loading-OpenSDAv2-and-DAPLink-to-FRDM-K64F/m-p/843455#M50814 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Please check below thread with similar requirement:</P><P><A href="https://community.nxp.com/thread/445886">When i connect TWR-KE18F to my PC it shows portal device instead of COM PORT. I unable to change bootloader due to that …</A>&nbsp;</P><P>The OpenSDA firmware for FRDM-K64F board could be download from <A href="https://www.nxp.com/support/developer-resources/run-time-software/kinetis-developer-resources/ides-for-kinetis-mcus/opensda-serial-and-debug-adapter:OPENSDA#FRDM-K64F">here</A>.</P><P>Wish it helps.</P><P></P><P>best regards,</P><P>Mike</P></BODY></HTML> Tue, 14 Aug 2018 12:47:40 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Loading-OpenSDAv2-and-DAPLink-to-FRDM-K64F/m-p/843455#M50814 Hui_Ma 2018-08-14T12:47:40Z