topic Re: Compilation error for Freedom bootloader in KDS 3.2.0 in Kinetis Microcontrollers

Compilation error for Freedom bootloader in KDS 3.2.0

dhanapal_rajend — Tue, 03 Jul 2018 06:00:02 GMT

I have a FRDM-K82F: Freedom Development Platform for K82, K81. I am trying to compile freedom_bootloader in KDS 3.2.0 and I am getting error. Document has the procedure for IAR but i am using KDS.

Document has below procedure

"Select C/C++ Compiler, and the preprocessor tab. Scroll down in the defined symbols. Note that all unused interfaces are disabled. This is done to save code size and remove un needed interfaces."

I am not seeing any respective setting in KDS.

If I try to compile then i am getting linker error.

Any comments please.

Regards

R.Dhanapal

Re: Compilation error for Freedom bootloader in KDS 3.2.0

mjbcswitzerland — Tue, 03 Jul 2018 16:43:53 GMT

http://www.utasker.com/kinetis/FRDM-K82F.html

In case of complications, KBOOT (and other) solutions are available at the link that build with all IDEs (http://www.utasker.com/kinetis/compilers.html)

Regards

Mark

Re: Compilation error for Freedom bootloader in KDS 3.2.0

danielchen — Thu, 05 Jul 2018 03:29:37 GMT

Hi R.Dhanapal:

Just did a quick test on KBOOT with Frdm-k82, it can compile successfully with KDS 3.2 on my side. I would suggest you download from MCU Bootloader|NXP and try it again.

NXP_Kinetis_Bootloader_2_0_0\NXP_Kinetis_Bootloader_2_0_0\targets\MK82F25615\kds\freedom_bootloader

Regards

Daniel

Re: Compilation error for Freedom bootloader in KDS 3.2.0

dhanapal_rajend — Thu, 05 Jul 2018 05:00:47 GMT

Hi Daniel,

Thank you very much for your support. Fresh copy of source is getting compiled. Old copy of source which is in my PC has some problem.

Regards

R.Dhanapal

Re: Compilation error for Freedom bootloader in KDS 3.2.0

dhanapal_rajend — Thu, 05 Jul 2018 10:30:15 GMT

Hi Daniel,

I have a document "Payment Solutions Secure boot Lab Guide 1_r0.2" it has

the procedure for IAR but i am using KDS 3.2.0version. By any chance i can

get the KDS based document. This would be helpful for me to proceed further

in a quick way.

Regards

R.Dhanapal

On Thu, 05 Jul 2018 03:30:17 +0000 (UTC), "danielchen@fsl"