Kinetis MicrocontrollersのトピックRe: Stand alone programmer

Stand alone programmer

john71 — Thu, 08 Nov 2018 09:13:04 GMT

A customer needs to program a binary file for Kinetis K10 family through JTAG interface. I don't have any settings for boot-loader to program through UART.

Do we have some utility for that purpose?

Re: Stand alone programmer

miduo — Mon, 12 Nov 2018 06:19:16 GMT

Hello,

I am a little confused. From what I understand, the most simple way for stand alone programmer is the "Flasher ARM":

Flasher ARM | SEGGER - The Embedded Experts or the Cyclone MAX from P&E

Cyclone MAX | Hardware Debug Interface & Stand-Alone Programmer for Kinetis, ColdFire V2/V3/V4, Power MPC5xx/8xx, MPC55x…

If you are using the JLINK, you can use the software under JLINK driver, eg, JLINK commander with command: loadfile xxx.bin.

Re: Stand alone programmer

john71 — Wed, 14 Nov 2018 06:38:17 GMT

I see. Thank you.