Selecting UART port in K60N512

Magnetron — Fri, 12 Aug 2011 20:07:10 GMT

Hi,

The default serial output in TWR-K60N512 board is UART3, PORTC (pin PTC16 - RX, pin PTC17 - TX).

In my custom board the default serial output is UART4, PORTE (pin PTE25 - RX, pin PTE24 - TX).

In <mqx_dir>\mqx\source\bsp\twrk60n512\twrk60n512.h i set UART4 (ttye):

#define BSP_DEFAULT_IO_CHANNEL "ttye:"

But I don't know how to select port E (custom board) insteed port C (TWR board).

Any ideas?

Re: Selecting UART port in K60N512

Magnetron — Fri, 12 Aug 2011 21:51:15 GMT

Solution has been found.

tfrauenrath — Thu, 18 Oct 2012 10:11:06 GMT

Can you please write down the Solution? THX.