Kinetis MicrocontrollersのトピックHow do you download a build from IAR Embedded Workbench to FRDM-K64F? https://community.nxp.com/t5/Kinetis-Microcontrollers/How-do-you-download-a-build-from-IAR-Embedded-Workbench-to-FRDM/m-p/791786#M48176 <HTML><HEAD></HEAD><BODY><P>I loaded the lwip_httpssrv_mbedTLS_bm example software for IAR. I built it using IAR Embedded Workbench IDE - ARM 8.11.2. All went smoothly. So how do I load it into my FRDM-K64F development board so I can test it?</P></BODY></HTML> Thu, 01 Nov 2018 14:31:57 GMT mark_hammer 2018-11-01T14:31:57Z How do you download a build from IAR Embedded Workbench to FRDM-K64F? https://community.nxp.com/t5/Kinetis-Microcontrollers/How-do-you-download-a-build-from-IAR-Embedded-Workbench-to-FRDM/m-p/791786#M48176 <HTML><HEAD></HEAD><BODY><P>I loaded the lwip_httpssrv_mbedTLS_bm example software for IAR. I built it using IAR Embedded Workbench IDE - ARM 8.11.2. All went smoothly. So how do I load it into my FRDM-K64F development board so I can test it?</P></BODY></HTML> Thu, 01 Nov 2018 14:31:57 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-do-you-download-a-build-from-IAR-Embedded-Workbench-to-FRDM/m-p/791786#M48176 mark_hammer 2018-11-01T14:31:57Z Re: How do you download a build from IAR Embedded Workbench to FRDM-K64F? https://community.nxp.com/t5/Kinetis-Microcontrollers/How-do-you-download-a-build-from-IAR-Embedded-Workbench-to-FRDM/m-p/791787#M48177 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>The attached document has step by step on how to use with IAR. Hope it is helpful.</P></BODY></HTML> Sun, 04 Nov 2018 19:07:18 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-do-you-download-a-build-from-IAR-Embedded-Workbench-to-FRDM/m-p/791787#M48177 miduo 2018-11-04T19:07:18Z