topic Re: USB-KW019032: cannot capture any packets in Kinetis Microcontrollers

USB-KW019032: cannot capture any packets

alvischang — Thu, 26 Jul 2018 07:35:21 GMT

Dear all,

I use the ZigBee device and set up the channel to page 28 channel 0. When I try to established the ZigBee network, the sniffer cannot capture any packet.

How can I use test tool 12 to capture the sniffer?

I have already followed all the steps mentioned in the Packet Sniffer/USB Dongle for Kinetis KW0x Getting Started.

Re: USB-KW019032: cannot capture any packets

stephanie_m — Wed, 01 Aug 2018 00:46:54 GMT

Hello,

By any chance, have you checked the following threads?

Sub-GHz Protocol Sniffing with KW01 Using Test Tool 12.

https://community.nxp.com/thread/331972

Regards,

Estephania

Re: USB-KW019032: cannot capture any packets

alvischang — Wed, 01 Aug 2018 02:02:48 GMT

Hi,

I have followed this threads, and it does't work.

I have tried the Test Too12 with three versions(12.2.1, 12.7.1, 12.8.1).

If I use KW01Z128_Sniffer.srec to reflash the dongle, all of these tools cannot detect the dongle.

So, I use the method in the link as below.

Packet Sniffer/USB Dongle for Kinetis KW0x|NXP (2.3 Download the sniffer application)

After that, the dongle can be detected in the tool with version 12.7.1 and version 12.8.1.

Although the dongle can be detected, I still cannot capture any sniffer through it.