reset pin generates a square wave

mehmetekici — Tue, 26 Nov 2013 14:02:58 GMT

Hello,

We have come accross a problem with our design. Some of our boards has very strange behaviour on their reset pin. We see a squareware at reset pin.

We have one board with a brand new cpu and two others we had programmed with adc example provided by freescale.

Information on the cpu package.

MK60DN512VLQ10 runs with 50 Mhz oscillator.

4N22D

OCTAA1250AA

you can see the details enclosed schematics also scoped reset

signal together with VDD. another measurement is taken after reset circuit connection cut from the reset pin.

Best regards,

Mehmet

Re: reset pin generates a square wave

Hui_Ma — Wed, 27 Nov 2013 06:27:03 GMT

"If flash is not programmed, the reset vector is 0xFFFFFFFF , it is a illegal address, will cause reset. In reset sequence, reset pin will drive out it is better to have pull up resistors with the reset pin."

So the waveform you observed is an expected behavior.

topic Re: reset pin generates a square wave in Kinetis Microcontrollers

reset pin generates a square wave

Re: reset pin generates a square wave