topic Re: Error: Flash Download failed - Target DLL has been cancelled in Kinetis Microcontrollers

Error: Flash Download failed - Target DLL has been cancelled

alejandrorico — Mon, 13 Nov 2017 05:17:29 GMT

Hello. I'm trying to download a simple program to FRDM-KL25 board but I'm still getting this message:

Error: Flash Download failed - Target DLL has been cancelled.

I have already:

intalled driver for kinetis (Freescale Kinetis OSJTAG Drivers V1.20)
installed PEMicro as stated on *.pdf guides quotet on this topic: Hello everybody,when I loading program with MDK it appears unable to find device information.PE34298
followed steps from a tutorial of a ARM-KEIL guy Software development with the Freescale Kinetis SDK using Keil MDK Version 5 - YouTube
selected the right MCU: MKL25Z128xxx4 since the FRDM-KL25 board has a: MKL25Z128VLK4 device.
selected PEMicro on the debugger options.
tried to download an example project from Kinetis SDK v1.3. (based on the video tutorial)

Then, I don't know what I'm missing. I'm attaching some images of the configurations.

Thanks for your support.

Re: Error: Flash Download failed - Target DLL has been cancelled

jingpan — Tue, 14 Nov 2017 08:00:16 GMT

Hi Alejandro,

KL25's driver is not Kinetis OSJtag. It's PEMicro.

Please download driver and firmware form the link:

https://www.nxp.com/support/developer-resources/run-time-software/kinetis-developer-resources/ides-for-kinetis-mcus/opensda-serial-and-debug-adapter:OPENSDA?&tid=vanOpenSDA#FRDM-KL25Z

Regards

Jing

Re: Error: Flash Download failed - Target DLL has been cancelled

alejandrorico — Wed, 15 Nov 2017 04:27:25 GMT

Hello Jing. Thanks.

Yeah, I actually had that option available before. Let me give some extra information.

At first I had two issues:

The first one is explained on following thread: Hello everybody,when I loading program with MDK it appears unable to find device information.PE34298. There, you instructed this guy to install the OSJTAG Drivers. So I did the same.
The other isuse is the one I'm explaining here.

Both: the "PE34298 error" and the "Flash error" were present at a time. After I installed the OSJTAG drivers the first error disappeared but the "flash thing error" remained. Also, the option "PEMicro Debugger" disappeared and "Pemicro OSJtag/Multilink/Cyclo" option appeared instead.

I understand that the default debug firmware on KL25 is PEMicro, and the link you gave me talks about that. Anyway, on the proccess I also tried with "CMSIS-DAP_OpenSDA.S19". I downloaded the firmware to the board with the proper procedure and then selected the "CMSIS-DAP Debugger" option on target configurations at Keil IDE. I didn't work neither. So I went back to download the OpenSDA firmware.

So you see "Pemicro OSJtag/Multilink/Cyclo" option selected because "PEMicro Debugger" is not available anymore.

Anyway, I doubt that to be the problem, just beacuse the problem was there even when "PEMicro Debugger" was selected.

Just to be clear, the board has again the OpenSDA firmware; but problem is still there.

What do you recommend?

Re: Error: Flash Download failed - Target DLL has been cancelled

benkonna — Fri, 13 Jul 2018 15:08:47 GMT

Hello Alejandro or anyone out there,

I am stuck with the same issue sas stated by Alejandro.

I have followed all the installation procedure listed above as as much as I can find online.

Alejandro, how did you solve this?

Help is welcomed from anyone out there.

Thanks very much.