Kinetis MicrocontrollersのトピックRe: KL16 flash ROM problem

KL16 flash ROM problem

takashikonno — Thu, 09 Nov 2017 06:09:22 GMT

The flash ROM data of MKL16Z128VFM4 has been rewritten and the program has not started. What are the possible causes?

Re: KL16 flash ROM problem

kerryzhou — Tue, 14 Nov 2017 05:43:51 GMT

Hi Takashi Konno,

KL16 don't have the ROM, it just has the flash.

Do you mean you download the code to the KL16 flash, but it doesn't work?

I suggest you to use the official code, and download it, debug it, to check the details.

You can download the SDK from this link:

https://mcuxpresso.nxp.com/en/select

Any updated question, just let me know!

Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: KL16 flash ROM problem

takashikonno — Tue, 14 Nov 2017 06:58:36 GMT

Dear Kerry

I checked the operation by writing the program to the flash.

However, there was a problem that the program did not operate when the

power-on startup was repeated afterwards.

It seems that the flash program data has been overwritten and lost.

It will work again by writing to the flash again.

This problem is not reproducible.

T Konno

Re: KL16 flash ROM problem

kerryzhou — Tue, 14 Nov 2017 08:33:59 GMT

Hi T Konno,

Before you write the flash, please erase that area at first, then program it.

When you do the flash operation, please disable the global interrupt.

If you still have problem, you can give me your test project, I will help you to check it.

Kerry

Re: KL16 flash ROM problem

takashikonno — Tue, 14 Nov 2017 09:29:23 GMT

Dear Kelly

Thank you for your reply.

We handle your advice.

Unfortunately we can not send a test program.

Is there a possibility of hardware rather than software?

For example, ESD, reset timing, UART timing of the boot loader, etc.

T Konno

Re: KL16 flash ROM problem

kerryzhou — Wed, 15 Nov 2017 01:44:23 GMT

Hi Takashi Konno,

Do you mean you are using UART flash bootloader?

If yes, you can refer to the KBOOT2.0, KL25 bootloader: www.nxp.com/kboot

You also can refer to this post for KL26 bootloader:

How to make MKL26Z128 be recognized by KBOOT Flash Tool Utility?

Kerry

Re: KL16 flash ROM problem

takashikonno — Wed, 15 Nov 2017 06:16:52 GMT

Dear Kerry

Thank you for the information.

I will continue checking the operation with reference to the

information

T Konno

Re: KL16 flash ROM problem

kerryzhou — Wed, 15 Nov 2017 08:11:51 GMT

OK, after you check it, if you have question, just let me know!

Kerry