topic Re: Programming K64F board by drag and drop bin./ hex. file in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/Programming-K64F-board-by-drag-and-drop-bin-hex-file/m-p/749039#M45602 <HTML><HEAD></HEAD><BODY><P>Hi Tomasz Sobiech</P><P></P><P>It will depend on the OpenSDA debugger interface. Most of the application perform a mass erase before flashing your program.</P><P></P><P>Hope this helps.<BR />Have a great day,<BR />TIC</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Wed, 21 Feb 2018 22:29:38 GMT jorge_a_vazquez 2018-02-21T22:29:38Z Programming K64F board by drag and drop bin./ hex. file https://community.nxp.com/t5/Kinetis-Microcontrollers/Programming-K64F-board-by-drag-and-drop-bin-hex-file/m-p/749038#M45601 <HTML><HEAD></HEAD><BODY><P>Hello!</P><P>I have one question.</P><P>If I programmed my K64F board by using bin. or .hex file and "drag and drop" method will all flash also be erased?</P><P></P><P>Regards!</P></BODY></HTML> Fri, 16 Feb 2018 13:53:26 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Programming-K64F-board-by-drag-and-drop-bin-hex-file/m-p/749038#M45601 grochal7 2018-02-16T13:53:26Z Re: Programming K64F board by drag and drop bin./ hex. file https://community.nxp.com/t5/Kinetis-Microcontrollers/Programming-K64F-board-by-drag-and-drop-bin-hex-file/m-p/749039#M45602 <HTML><HEAD></HEAD><BODY><P>Hi Tomasz Sobiech</P><P></P><P>It will depend on the OpenSDA debugger interface. Most of the application perform a mass erase before flashing your program.</P><P></P><P>Hope this helps.<BR />Have a great day,<BR />TIC</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Wed, 21 Feb 2018 22:29:38 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Programming-K64F-board-by-drag-and-drop-bin-hex-file/m-p/749039#M45602 jorge_a_vazquez 2018-02-21T22:29:38Z