topic Product Selection in Kinetis Microcontrollers

Product Selection

psh1 — Thu, 31 May 2018 01:13:05 GMT

Recently, we are trying to develop a DC meter (Class 0.5) by increasing use of DC.

So I want to use the MKM33Z or MCF51EM Series.

But if you have another MCU that is suitable for DC meter, I would like to recommend it.

I will wait for your reply.

Best regard.

Re: Product Selection

jingpan — Fri, 01 Jun 2018 03:37:14 GMT

Hi,

It is depend on what function do you need. If your design is not very complex, I think KM1x is also a good choice.

https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/m-seriesmetrologym0-plus/kinetis-km1x-50-mhz-mainstream-precision-metrology-microcontrollers-based-on-arm-cortex-m0-plus:KM1x

Regards,

Jing

Re: Product Selection

psh1 — Fri, 01 Jun 2018 07:59:13 GMT

Hello, Jing.

Thank you for good information.

Thank you for helping me.

Best regard.

2018-06-01 12:38 GMT+09:00 jingpan <admin@community.nxp.com>:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: Product Selection
reply from Jing Pan
<https://community.nxp.com/people/jingpan?et=watches.email.thread> in *Kinetis
Microcontrollers* - View the full discussion
<https://community.nxp.com/message/1020309?commentID=1020309&et=watches.email.thread#comment-1020309>