Kinetis Microcontrollers中的主题 Re: Best way to learn how to program MCUs?

Best way to learn how to program MCUs?

dgrullon — Fri, 22 Sep 2017 16:16:16 GMT

I'm coming from a background of programming Arduino's and Raspberry Pi's. For this MCU, I'm learning on a FRDM-K64F. I see that I have to initialize what pins I'm using, use libraries created by NXP (some are dated on the MCUXpresso API Reference Manual), etc. I was wondering if there were any courses or lessons that are progressive.

Where I start with the teacher assuming the reader doesn't know anything and brings them up to an acceptable level where we can do what we want.

Re: Best way to learn how to program MCUs?

mjbcswitzerland — Fri, 22 Sep 2017 23:35:55 GMT

Remote desktop training is available at
http://www.utasker.com/support.html

For MCUXpresso, KDS, S32 Design Studio, CodeWarrior, IAR, Keil, Atollic, Rowley Crossworks, CooCox, Green Hills, GCC makefiles and Visual Studio simulation, and Cortex M4F and all K64 peripherals {interrupts, DMA} [TCP/IP, USB, File Systems] (bare metal, uTasker OS or FreeRTOS).

Regards

Mark

http://www.utasker.com/kinetis.html
http://www.utasker.com/kinetis/FRDM-K64F.html