topic Re: MKE06Z UART Interrupt RX in Kinetis Microcontrollers

MKE06Z UART Interrupt RX

gangliu — Fri, 29 Sep 2017 08:15:33 GMT

HI,

Thank you for seeing my problem. I am using MKE06Z. I use the official UART Interrupt TX routine to write the program of UART Interrupt RX Find that I can't read the data I sent to the serial port. So, what functions should I configure when I use UART Interrupt RX ?

（A few lines of red dots, I added. ）

Thank you!

Re: MKE06Z UART Interrupt RX

jorge_a_vazquez — Fri, 06 Oct 2017 17:02:14 GMT

Hi GANG LIU

Where did you fill rx_data? for this you have to call function UART_ReceiveInt, as the example have it implemented for transmission, please check below code:

Hope this could help you.

Best Regards

Jorge Alcala

Re: MKE06Z UART Interrupt RX

gangliu — Sun, 05 Nov 2017 06:12:47 GMT

Hi Jorge Alcala

Thank you for your help. I have achieved my goal through your methods.

Best Regards

GANG LIU