Required commands in kinetis (k66 Processor)

prasadgj — Wed, 24 May 2017 13:20:14 GMT

Hello Everyone,

Can you tell me,list of commands to interface & test the peripherals & protocol in Bootloader.

Re: Required commands in kinetis (k66 Processor)

kerryzhou — Fri, 16 Jun 2017 09:19:11 GMT

Hi Prasad GJ,

About the K66 bootloader, you can refer to our KBOOT2.0, which can be downloaded from this link:

Kinetis Bootloader|NXP

After you download, you can find the K66 bootloader code in folder: NXP_Kinetis_Bootloader_2_0_0\targets\MK66F18

It is the flash bootloader, because K66 don't have the ROM bootloader.

About the command, you can find it from the according document :

NXP_Kinetis_Bootloader_2_0_0\doc

About the peripherals, it has UART, I2C, DSPI, USB_HID, USB_MSC. More details, you can check the code.

Wish it helps you!

If you still have question, please let me know!

Have a great day,
Kerry

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Required commands in kinetis (k66 Processor)

prasadgj — Tue, 31 Oct 2017 05:49:52 GMT

Thank you Kerry

Kinetis Microcontrollers中的主题 Required commands in kinetis (k66 Processor)

Required commands in kinetis (k66 Processor)

Re: Required commands in kinetis (k66 Processor)

Re: Required commands in kinetis (k66 Processor)