Kinetis MicrocontrollersのトピックRe: KL25Z board problem https://community.nxp.com/t5/Kinetis-Microcontrollers/KL25Z-board-problem/m-p/663209#M40733 <HTML><HEAD></HEAD><BODY><P>Hi </P><P></P><P>Please try the method descripted in "<A href="https://mcuoneclipse.com/2016/08/01/bricking_and_recovering_opensda_boards_in_windows_8_and_10/">Bricking and Recovering OpenSDA Boards in Windows 8 and 10</A>".</P><P></P><P>Best Regards,</P><P>Robin</P><P style="min- padding: 0px;">&nbsp;</P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />---------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Wed, 21 Dec 2016 00:29:33 GMT Robin_Shen 2016-12-21T00:29:33Z KL25Z board problem https://community.nxp.com/t5/Kinetis-Microcontrollers/KL25Z-board-problem/m-p/663208#M40732 <HTML><HEAD></HEAD><BODY><P>I have a Freedom board KL25Z. I tried to upload my .bin file in the drive that was created but instead the board got disconnected everytime, so i tried to run it in bootloader mode and upload the MSD file from the NXP site and now the debug mode wont start, in the bootloader mode the status LED blinks for 7-8 times quickly and this goes on instead of the 1s gap, no firmware worked. Please help.</P><P></P><P>PS: I m working on Windows 10</P></BODY></HTML> Tue, 15 Nov 2016 14:55:28 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/KL25Z-board-problem/m-p/663208#M40732 sarthakkelapure 2016-11-15T14:55:28Z Re: KL25Z board problem https://community.nxp.com/t5/Kinetis-Microcontrollers/KL25Z-board-problem/m-p/663209#M40733 <HTML><HEAD></HEAD><BODY><P>Hi </P><P></P><P>Please try the method descripted in "<A href="https://mcuoneclipse.com/2016/08/01/bricking_and_recovering_opensda_boards_in_windows_8_and_10/">Bricking and Recovering OpenSDA Boards in Windows 8 and 10</A>".</P><P></P><P>Best Regards,</P><P>Robin</P><P style="min- padding: 0px;">&nbsp;</P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />---------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Wed, 21 Dec 2016 00:29:33 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/KL25Z-board-problem/m-p/663209#M40733 Robin_Shen 2016-12-21T00:29:33Z