topic Debug configuration problem ,getting an error KL25Z in Kinetis Microcontrollers

Debug configuration problem ,getting an error KL25Z

crististancana — Fri, 17 Mar 2017 16:20:09 GMT

Hello everyone,

I have a problem with my KL25Z and i really apreciate if somebody will help me.Ok first of all the problem is when i try to download a program to my board using debuger configuration i get an error , the error is from OPEN SDA port. I update it and still doesn t work.I am really stacked with my college degree and i don t know what to do (i tasted that on windows 8.1 64 bits and windows 7 64 bits). I made some printscreen maybe will help you to understand my problem.

If anybody knows a solution it will me really usefull!

Thank you!

####

Re: Debug configuration problem ,getting an error KL25Z

TudorS_ — Mon, 20 Mar 2017 09:21:48 GMT

Have you also tried the J-Link OpenSDA firmware from here:

SEGGER - The Embedded Experts - OpenSDA / OpenSDA V2

Re: Debug configuration problem ,getting an error KL25Z

crististancana — Thu, 23 Mar 2017 18:35:42 GMT

Yes i do and it is the same problem.

Re: Debug configuration problem ,getting an error KL25Z

crististancana — Fri, 24 Mar 2017 06:33:11 GMT

I solved the problem! Thank you for your help!

2017-03-20 11:22 GMT+02:00 TudorS. <admin@community.nxp.com>:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: Debug configuration problem ,getting an error KL25Z
reply from TudorS.
<https://community.nxp.com/people/TudorS.?et=watches.email.thread> in *Using
NXP Community* - View the full discussion
<https://community.nxp.com/message/888536?commentID=888536&et=watches.email.thread#comment-888536>

Re: Debug configuration problem ,getting an error KL25Z

cristians — Fri, 24 Mar 2017 07:52:15 GMT

Apparently you solved the problem in a different way than Tudor suggested. It would be helpful for others to see what was your solution.