topic Re: How to import baremetal example in kinetis design studio in Kinetis Microcontrollers

How to import baremetal example in kinetis design studio

sameerarvikar — Wed, 05 Apr 2017 08:38:52 GMT

I am using kinetis design studio v3.2 and kinetis k70

I downloaded baremetal examples for kinetis k70 from the following link

https://www.nxp.com/webapp/sps/download/preDownload.jsp

I imported the projects(e.g. helloworld)from the directory downloaded from above link as given in kinetis design studio user guide

Now if i build the project

Following warning comes :- Invalid project path: Include path not found (some path).

when i go to project properties

project > properties > c/C++ Build > Settings

I found following error

Orphaned configuration. No base extension cfg exists for com.freescale.arm.cdt.toolchain.config.arm.release.2020066743

so i followed the steps given on following page (Steps of the conversion by manual configuration of the toolchain)

CW MCU 10.6 Processor Expert projects migration into KDS 3.0.0

Now the following error is coming for helloworld example

fatal error: common.h: No such file or directory hello_world.c /k70-hello-world/Sources/hello_world line 7 C/C++ Problem

make: *** [Sources/hello_world/hello_world.o] Error 1 k70-hello-world C/C++ Problem

how to resolve the problem

Re: How to import baremetal example in kinetis design studio

sameerarvikar — Wed, 05 Apr 2017 12:05:59 GMT

I also tried the following document

http://www.nxp.com/assets/documents/data/en/user-guides/KDSPUG.pdf

but no dialog box apears after i click on Convert CodeWarrior project file..

Re: How to import baremetal example in kinetis design studio

Alice_Yang — Thu, 06 Apr 2017 02:31:13 GMT

Hello sameer,

I don't recommend you use the directly porting, because there always some error need to configuration.

You can create a new project on KDS, then copy the the function files from CW to KDS project , build ,

even there is error , it easy to find and fix.

It seems you just want use KDS to develop K70, so I recommend you can create Processor Expert project

on KDS, there is also example , they can directly run on KDS :

- When create project ,please choose "Processor Expert" :

- For example , you want configuration a GPIO, just double click "GPIO_LDD" , it will add to your project :

- Then click "help on component " -> Typical Usage :

Hope it helps

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: How to import baremetal example in kinetis design studio

sameerarvikar — Sun, 09 Apr 2017 04:34:25 GMT

Thanks,

I also tried codewarrior or mcu v10.7 , there also errors were coming