topic Re: CW10.3 causes "linker command file error at line..." in Kinetis Microcontrollers

CW10.3 causes "linker command file error at line..."

ignisuti — Wed, 02 Jan 2013 22:27:15 GMT

I had a project working beautifully with CW10.2. I tried to upgrade to 10.3 and right off the bat I get "codewarrior linker command file error at line...". This error is repeated for every .obj file specified in my linker configuration file.

Any thoughts on what might be causing this?

Re: CW10.3 causes "linker command file error at line..."

BlackNight — Thu, 03 Jan 2013 06:13:50 GMT

Hi,

it would be very helpful if you could post more details (which processor used, which compiler) plus the error message and linker file used, or an example?

Re: CW10.3 causes "linker command file error at line..."

ignisuti — Thu, 03 Jan 2013 14:40:52 GMT

Erich,

Processor: MK10DN512ZVLQ10

Compiler: How can I find this info?

The error messages all start with "linker command file error at line..." and then list all the line numbers where I list.obj files.

Problems: http://dl.dropbox.com/u/438946/Permanent/Problems.txt

LCF: http://dl.dropbox.com/u/438946/Permanent/MK10DN512Z_flash.lcf

Re: CW10.3 causes "linker command file error at line..."

ignisuti — Fri, 22 Feb 2013 01:20:34 GMT

I'm still unable to move onto CW 10.3. If anyone has any suggestions, please let me know. Freescale technical support has been very unhelpful.