topic Re: Configuring Glitch Settings in Kinetis Microcontrollers

Configuring Glitch Settings

monjen72 — Mon, 07 Nov 2016 22:02:37 GMT

Hi, I am new to arm and coding with registers. I use CodeWarrior(10.7) with Processor Expert to program Trk-kea128. I have made research about how to handle glitches of inputs. I searched internet, checked the SKEAZ1284.h file forPORT_IOFLT0 register and checked the kea128RM datasheet too. Though, I have not figured out how to configure glitch settings for any port or inputs. Can anyone give me a few examples of how to handle glitches. Your helps will be appreciated !!

Re: Configuring Glitch Settings

dogukangovce — Tue, 08 Nov 2016 11:31:53 GMT

Hi. I have been searching this subject for a aweek and I didnt succeed. If you find anything useful can you share that in here?

Thanks.
Dogukan.

Re: Configuring Glitch Settings

monjen72 — Tue, 08 Nov 2016 18:38:46 GMT

Hi, what a deserted blog this is, I reckon everybody keeps themselves watching youtube nowadays :/ No time to code and help ??

Re: Configuring Glitch Settings

mjbcswitzerland — Tue, 08 Nov 2016 19:19:43 GMT

In the KEA128 user's manual:

Then see the PORT_IOFLT0 and PORT_IOFLT1 descriptions for the actual values to write.

Regards

Mark
Kinetis for professionals: http://www.utasker.com/kinetis.html
http://www.utasker.com/kinetis/FRDM-KEAZ128Q80.html