Flashing/debugging TWR-K21F120M

martis — Fri, 14 Oct 2016 10:13:19 GMT

I am not able to connect to my TWR-K21F120M kit. Previously, I have used it from Kintetis Desing Studio with the built in PNE interface but all of a sudden this does not show pop-up as an option when pressing the Debug Button.

Here, only OpenOCD and Segger are available.

Trying to use J-trace also gives me an error message, and when trying to connect with J-Flash I get the error message "Kinetis (connect): Communication error while accessing AHB-AP."

How can I connect to my TWR-K21F120M kit again?

Re: Flashing/debugging TWR-K21F120M

Jonathan_Iglesias — Tue, 25 Oct 2016 21:04:06 GMT

Hello Marte, first of all I apologize for the delay, What I understood from your problem is that you dont find the debug configuration.

connect your MCU to your PC.
in the Device Manager check how the computer recognize it for example
- in my case as OSJTAG
then go to KDS to the debug icon > debug configuration.
In this window please double click on the configuration you have for example my device was recognized as JTAG so ill double click on the Jlink debugging
the browse for your project location. and the application (.elf) to be uploaded to the MCU. on your project folder go to debug folder and when you build it will generate a .elf file with the name of the project like this
apply and debug or apply and close
now you will have a configuration for your MCU and you should be able to debug it.

Please let me know if you have more questions, if this did not solved the problem please give me more information to have a better understanding of your problem.

have a great day !

Jonathan

Kinetis MicrocontrollersのトピックRe: Flashing/debugging TWR-K21F120M

Flashing/debugging TWR-K21F120M

Re: Flashing/debugging TWR-K21F120M