Kinetis Microcontrollers中的主题 Question: Flash Programming software for K20/K64 MCU

Question: Flash Programming software for K20/K64 MCU

danielcheng — Mon, 07 Nov 2016 17:24:58 GMT

In my PCB design, I need to program the K20 (K20DN63M5) on my PCB through JTAG physical interface with the programmer device (P&E USB Multilink Universal). Right now, The software interface I use to program is the Kinetis Design studio IDE (3.2.0, go to " pull down menu 'Run -> Flash from file ...'") . Is there a standalone software to be used for flash/re-flashing the chip in this case? Is PROG12Z working for K-series chip? Otherwise, what's your recommendation? Thank you.

Re: Question: Flash Programming software for K20/K64 MCU

gnichimohamed — Mon, 07 Nov 2016 17:32:15 GMT

I use Segger and they have a tool called ozone you can use it to directly program the chips.

Re: Question: Flash Programming software for K20/K64 MCU

danielcheng — Mon, 07 Nov 2016 18:56:11 GMT

Thanks. But we already have P&G USB Multilink Universal in place. Do you know if PROG12Z works with this chip? Thanks again.

Re: Question: Flash Programming software for K20/K64 MCU

gnichimohamed — Mon, 07 Nov 2016 21:54:59 GMT

I really dont know.

There is one other way to automate flashing by using gdb on the command line. Check this out :smileyhappy:

Command Line Programming and Debugging with GDB | MCU on Eclipse

Re: Question: Flash Programming software for K20/K64 MCU

jorge_a_vazquez — Thu, 10 Nov 2016 01:17:05 GMT

Hi Daniel Cheng

PROG12Z is for HC12 or MC9(S)12(X). You can check PROG for ARM® Cortex in P&EMicro web page P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug probes, and …

Hope this could help

Best Regards

Jorge Alcala