ETHERNET PROBLEM IN MK66

maheshwarreddy — Tue, 20 Dec 2016 09:11:13 GMT

Hi,

I'am using the udo_echo in sdk2.0 of MK66 MCU , Its working fine whenever I choose ENET Clock source from ENET_1588_clk_in(PIN no:47), But I am trying to have Ethernet clock from XTAL(PIN NO:72).

I have done only a small change after that its not working!

Changes :

// SIM->SOPT2 |= SIM_SOPT2_RMIISRC_MASK; This line is replaced with following
SIM->SOPT2 &= 0x7FFFF;

Please Can anyone suggest me if any other modifications?..

Thank you ..,

Re: ETHERNET PROBLEM IN MK66

Hui_Ma — Wed, 21 Dec 2016 03:22:43 GMT

The K66 reference manual shows Ethernet module clock generation:

So customer's code can refer below code:

SIM->SOPT2 &= ~SIM_SOPT2_RMIISRC_MASK;

SIM->SOPT2 |= SIM_SOPT2_TIMESRC(2);

Wish it helps.

Have a great day,
Ma Hui
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: ETHERNET PROBLEM IN MK66 in Kinetis Microcontrollers

ETHERNET PROBLEM IN MK66

Re: ETHERNET PROBLEM IN MK66