Kinetis MicrocontrollersのトピックRe: Kinetis + CodeWarrior JTAG TAP?

Kinetis + CodeWarrior JTAG TAP?

gloucks — Tue, 21 Jun 2011 03:45:55 GMT

Is there a TAP device available to allow CodeWarrior to attach to the JTAG on my (future) production Kinetis board (like with my 56k devices)?

And is there a device available that allows the flash to be programmed thru the ezPort?

Re: Kinetis + CodeWarrior JTAG TAP?

gloucks — Wed, 22 Jun 2011 04:38:19 GMT

Let me rephrase the question:

1. What hardware/K60-feature do I need on my board to bring up a production K60 board?

2. What tool connects my production board to CodeWarrior?

3. What tool can I use to program the ezPort? Would it be the same tool as 2?

Re: Kinetis + CodeWarrior JTAG TAP?

TravisHidlay — Fri, 24 Jun 2011 21:55:38 GMT

I have pretty much the same questions; in addition, for #2, what else is needed to allow debugging the code from CW on a production board?

Re: Kinetis + CodeWarrior JTAG TAP?

pgo — Sat, 25 Jun 2011 08:56:03 GMT

The kinetis device is supported by a few JTAG BDMs that support debugging and programming. Search for the following:

Commercial:

Hobby/Open source

Any of these should work with the "standard" 10-pin or 20-pin JTAG interface. You can look at the Freescale demo boards for example connector circuits.

Bye