topic Re: We would like to develop a hardware and software project based on uP MK60FX512VLQ12.... in Kinetis Microcontrollers

We would like to develop a hardware and software project based on uP MK60FX512VLQ12....

paoloziveri — Wed, 14 Sep 2016 11:21:29 GMT

We would like to develop a hardware and software project based on uP MK60FX512VLQ12,
especially because it integrates EEPROM / FlexRam 16KB.

For this device the evaluation board is TWR-K60F120M (see KINETISKMCUSELGD guide page 18 and page 24).

This card mounts MK60FN1M0VD12, in this uP is not present the 'EEPROM / FlexRam.
In the development system Kinetis Design Studio is not possible select TWR-K60F120M,
but we can create a project with the MK60FN1M0xxx12 device.

1) If we develop the project with Kinetis Design Studio with device MK60FN1M0xxx12
we can transfer it and test it on the TWR-EVB K60F120M?

2) What do you suggest as an alternative to evaluate the MK60FX512VLQ12 before
   realize the hardware?

   Thanks.
   Regards

Paolo Ziveri

Re: We would like to develop a hardware and software project based on uP MK60FX512VLQ12....

jorge_a_vazquez — Sat, 17 Sep 2016 20:32:17 GMT

HI Paolo Ziveri

TWR-K60F120M uses MK60FN1M0VLQ12, and since you have a MK60FX512VLQ12, both of them have same features, with the differences of 'N/X' and '1M0/512' witch mean:

In KDS (Kinetis Design Studio) you should have to select MK60FX512xxx12, not MK60FN1M0xxx12

Hope this helps, please tell me if you have any more question on this.
Have a great day,
Jorge Alcala

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------