topic DSC 56F8300E versus Kinetis KV in Kinetis Microcontrollers

DSC 56F8300E versus Kinetis KV

miroslavmartise — Wed, 08 Feb 2017 11:01:23 GMT

Hello everybody,

I am going to construct a new device, which will be used as AC induction motor controller. I have worked with DSC 56F8300E(X) recently, but nowadays I am ruminating on Kinetis KV platform. Which platform is according to you better for new development? What is your opinion?

Thank you very much for your replies.

Re: DSC 56F8300E versus Kinetis KV

xiangjun_rong — Thu, 09 Feb 2017 03:03:18 GMT

Hi,

I do not know if you use FOC or VVVF algorithms to control a ACIM, anyway, I suggest you use KV family to control ACIM.

We have the library for the motor control based on Cortex-M0, Cortex-M4 and Cortex-M7, for example Clark/park transformation, PID, SVPWM, bus voltage decolping...

For example, most of peripherals of KV5x are the same as that of DSC.

This is KV website:

Kinetis Low Power 32-bit Microcontrollers (MCUs) based on ARM® Cortex®-M Cores|NXP

Hope it can help you

XiangJun Rong

Re: DSC 56F8300E versus Kinetis KV

miroslavmartise — Wed, 15 Feb 2017 12:42:01 GMT

Hi,

thank you for your advice. So, I have decided to use Kinetis V based platform for my current project regarding ACIMs. I believe, it will work fine...

Nice day,

Miroslav