topic MCUXpresso Config Tools in Kinetis Microcontrollers

MCUXpresso Config Tools

john71 — Wed, 22 Mar 2017 18:51:49 GMT

On the site in MCUXpresso Config Tools I choose New Configuration but I don't see in the list MK10FN1M0VLQ12. The chip is not supported in SDK?

Re: MCUXpresso Config Tools

Hui_Ma — Thu, 23 Mar 2017 05:38:12 GMT

The KSDK software doesn't support MK10FN1M0VLQ12 product so far. Sorry for that.

Customer could consider to use Processor Expert tool provided driver or related bare-metal project.

Wish it helps.

Have a great day,
Ma Hui
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: MCUXpresso Config Tools

john71 — Thu, 23 Mar 2017 06:05:07 GMT

Are the examples for K70 compatible to K10?

Re: MCUXpresso Config Tools

Hui_Ma — Thu, 23 Mar 2017 06:08:37 GMT

Yes, the K10_120MHz is the same platform product with K70_120MHz product.

Wish it helps.

Re: MCUXpresso Config Tools

john71 — Thu, 23 Mar 2017 06:10:04 GMT

I see. Thank you.

Re: MCUXpresso Config Tools

john71 — Thu, 23 Mar 2017 08:15:30 GMT

Well... I port the code from K70 project.

//#include "MK70F12.h"

#include "MK10F12.h"

#include "gpio.h"

void GPIO_Init(void)

{

//Enable Port clocks

PORTB_PCR11 = PORT_PCR_MUX(1) | PORT_PCR_DSE_MASK;

GPIOB_PDDR |= 1<<11;

GPIOA_PDDR |= 1<<11;

GPIOA_PDDR |= 1<<12;

GPIOA_PDDR |= 1<<28;

GPIOA_PDDR |= 1<<29;

}

I get errors:

'GPIOA_PDDR' undeclared (first use in this function)
'GPIOB_PDDR' undeclared (first use in this function)
'PORTB_PCR11' undeclared (first use in this function)
'SIM_SCGC5' undeclared (first use in this function)

Re: MCUXpresso Config Tools

Hui_Ma — Thu, 23 Mar 2017 08:37:01 GMT

You could use "make_new_project.exe" file to create new project based on [hello_world] demo.

I had tested to create a new project for K10 project with IAR IDE.

I need to modify the <common.h> file:

/*
* Include the cpu specific header file
*/
#if (defined(CPU_MK70F120))
#include "MK70F15.h"
#elif (defined(CPU_MK60F120))
#include "MK70F15.h"
#elif (defined(CPU_MK10F120))
#include "MK10F12.h"
#else
#error "No valid CPU defined"
#endif

Then in <twr-k70f120m.h> file, change CPU type:

//#define CPU_MK70F120
#define CPU_MK10F120

Remove driver sdram folder with <sdram.c>&<sdram.h> files.

Then remove DDR initialization function call at <sysinit.c> file.

After that, I could pass compile of the project.

Wish it helps.

Re: MCUXpresso Config Tools

john71 — Thu, 23 Mar 2017 08:39:26 GMT

Thank you.