Kinetis Microcontrollers中的主题 ezPort on Kinetis

ezPort on Kinetis

colonel_panic — Thu, 09 Jun 2011 14:56:59 GMT

Hi.

Is there a document anywhere which describes the ezPort protocol as implemented on the Kinetis family ?

Re: ezPort on Kinetis

mnorman — Fri, 10 Jun 2011 22:51:20 GMT

There is an EzPort chapter in the Reference Manual for each Kinetis device. In the case of the K60 100MHz 144 pin parts, the EzPort is described in chapter 30: K60P144M100SF2RM

The datasheets contain the timing specifications/requirements. e.g. K60P144M100SF2

-mnorman

Re: ezPort on Kinetis

robertofrechill — Thu, 19 Sep 2013 08:16:30 GMT

Hi, I´m developing the EZport programming with my Kinetis K20, I need information about what kind of file I must to charge by EZport and how I can transform my code file in this file.

Thanks.

Roberto

Re: ezPort on Kinetis

LuisCasado — Thu, 19 Sep 2013 10:35:18 GMT

Hi ,

Have you seen this AN?

AN4406
AN4406, KwikStik-based EzPort programmer - Application Notes

Luis

Re: ezPort on Kinetis

santiago_gonzal — Thu, 19 Sep 2013 10:39:13 GMT

Hello Roberto,

Have a look here:

Downloading an s19 file Using the

EzPORT Module on the MCF521x

ColdFire® Microcontroller.

http://www.freescale.com/files/32bit/doc/app_note/AN3897.pdf

The file you need to generate is a binary s19 file.

Regards.

Re: ezPort on Kinetis

robertofrechill — Thu, 19 Sep 2013 12:22:18 GMT

thanks!

Regards