Kinetis MicrocontrollersのトピックRe: Hard Fault When config SPI1_C1 on MKL33

Hard Fault When config SPI1_C1 on MKL33

brunoaguiam — Wed, 12 Apr 2017 15:46:47 GMT

Hello guys,

I am having a problem getting SPI1 as Slave, on PORTD, to work on a MKL33Z128VHL4.

When I try to configure the SPI Control Register 1 (SPI1_C1) , HardFault happens imediatly.

In first BOARD_InitPins();

// Config SPI1

SIM_SCGC4_SPI1(1);

   PORT_SetPinMux(PORTD,4u, kPORT_MuxAlt2);
   PORT_SetPinMux(PORTD,5u, kPORT_MuxAlt2);
   PORT_SetPinMux(PORTD,6u, kPORT_MuxAlt2);
   PORT_SetPinMux(PORTD,7u, kPORT_MuxAlt2);

Late I'm trying to config SPI Control Register 1 (SPI1_C1)

   SPI1->C1=~SPI_C1_SPE_MASK; (In this instruction HardFault happens imediatly)
   SPI1->C2=0;
   SPI1->C1=SPI_C1_CPHA_MASK;

...

I can't understand this HardFault happens, since exist clock on SPI1 module, and the pins are configurable.

I'm using KDS 3.2.0, SDK 2.0 and FreeRTOS V9.0.0 on the project.

Can semeone help me.

Best Regards,

Re: Hard Fault When config SPI1_C1 on MKL33

Robin_Shen — Thu, 13 Apr 2017 02:10:13 GMT

Hi Bruno,

SIM_SCGC4_SPI1(1); didn't enable the clock gate of SPI1 module.

You should use CLOCK_EnableClock function.

Best Regards,

Robin

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Hard Fault When config SPI1_C1 on MKL33

brunoaguiam — Thu, 13 Apr 2017 08:53:42 GMT

Hi Robin,

Thank's for your reply. It's exactly what's happening.

Best Regards,